Control Moduel?

[-[THC]-StreetGT]

Well my question here is why my control moduel has like 8-12 wires comming from it, and on the sleepy eye write up have 5. Im in need for a new moduel and there dont seem to be any of the same ones out there that will work for my car, so does anyone know why i have few more wires comming from my moduel than the other ones, i have a 94 PGT

[probespeed]

Are you sure you are looking at the control module for the headlights???:confused:

[Eric94GT]

http://www.geocities.com/MotorCity/Flats/9755/sleepy.htm

[probespeed]

looks to me that the control module is a part of a larger unit.

are you trying to do the sleepy eye mod or are you trying to replace the control module itself?

If you are trying to do the sleepyeye mod I have a better way;)

[-[THC]-StreetGT]

So does anyone know why i have so many wires from my control moduel or why it is a part of a larger unit?

[probespeed]

It is a part of a larger unit because ford(mazda) made it that way.
You have not told us what you are doing yet;) Maby then we could help:smokin:

[MN Probe GT]

for sleepy eyes. eric figured out from his last thread here.

[-[THC]-StreetGT]

No i was DOing sleepy eyes and when the ground for the light switch was made something went wrong cause now they dont work and they worked 2 mn before that, we tested them out when all the connections were made, they worked awsome i was super excited then i ran the wires behind the dash and made the connections for the switch and then they didnt work,s o i thought maybe i had to replace the control moduel?

does that help

[naustin]

I'm about as good with electricals as you are, man. :)

[probespeed]

Sounds to me like you just need to go through and make sure the connections are all good. You might have a loose one somewhere under the dash:)

[defylaw]

might be stupid, but what did you ground on? and you played w/ the switch to make sure it was correct? the only other things i can think of.

[-[THC]-StreetGT]

The ground was made on one of the Normal switches* in the car, for there light. We used the switch when we first made all connections and it worked, is it possiable to blow a control Moduel

[probespeed]

hook the wires up the way they were intended to be before you started doing the sleepy eye thing and see if your lights work.:shrug: If they do do I'll tell you how to do the sleepy eye's my way.;)

[-[THC]-StreetGT]

Ok well i went back and took out all the connections them redid them as they were before i evan attempted this crap. the Headlights come on, but do not rise, i can crank them up with the knobs and then replace the RETA* fuse and then they will go back down on their own so i think that elimanates* a fuse issue, so what is left that could be bad that will raise my Headlights?

[probespeed]

If you hooked it all back up right and they still don't work, you fried something:shrug: