2.5 v6 performance parts f/s

[rpgt93]

Okay guys I've got a few things for sale off of my probe so check it out, heres what I've got


67mm throttle body new, bored by rob (cyborgzero) on probetalk Sold

65mm throttle body used, sold

Nitrous express wet kit sold

Borla cat-back exhaust sold

4 stock camshafts a full set for the v6 2 intake and 2 exhaust, perfect for performance regrinds $40

2.5" Test pipe, sold

96+ style taillights black trim, Sold

Front strut bar, $15

Red cosmo racing adjustable fuel pressure regulator Sold

My Subs and amp, Sold

Full set of grey leather seats from a 93 gt fronts and rear, $25

MTD riding lawn tractor bagger, $50

[AspitFire]

got any pics or links to the riding lawn mower?? just bought a new house with an acre of land, need a rider... ill take it if its what i want.

[rpgt93]

yeah, http://f1.pg.photos.yahoo.com/ph/rpgt93/my_photos

basically there are 2 folders, the one with probe stuff shows the intake manifold, cai and my subs. The sale stuff folder has been around for a while but shows the leather seats and the bagger. Sorry I don't have a digital camera so its hard for me to get pics up but I can try on some of the other stuff especially if anyone is willing to lend a camera ;) or just bring one over

[AspitFire]

so, its just the bagger, not the actual mower?


nevermind i was hoping to get a cheap shitty riding mower... never mind :)

[youngin]

i just found out ive paid off my clutch.. i want the exhaust in the next 2 weeks or so if that sounds good.
how does the testpipe sound?? is it raspy with the catback? if not ill take that too. is it just as good as a jeff jeske?? for 325 would you throw in the tails as well?? haha worth a try.

[rpgt93]

Originally posted by youngin
i just found out ive paid off my clutch.. i want the exhaust in the next 2 weeks or so if that sounds good.
how does the testpipe sound?? is it raspy with the catback? if not ill take that too. is it just as good as a jeff jeske?? for 325 would you throw in the tails as well?? haha worth a try.

heres my take on the exhaust I've had the borla on my car with the test pipe and hotshot headers and it sounds awesome, borla on an otherwise stock exhaust sounds great, testpipe with the borla is a little louder and I think it makes it sound better, with my borla and test pipe I have not heard any rasp and it sounded good. On the other hand a testpipe on a stock exhaust sounds like crap, I don't know what it is but it makes the car sound bad and raspy. And I guess I'd take 325 for those 3 things as long as nobody else comes up with something before the 2 weeks are up

[cam]

i might be interested in your tailights, will the gt tailights work for a base?

[jay]

i take you arent goin to sell me your stock LEFT turn signal?

[matt]

Cam- Just focus on one thing at a time man. Fix the car first.

rpgt93- I'm interested in the 65 mm tb.

[ReDDiE2ShiFT]

it's his car...

[naustin]

I'm interested in the Hotshot and the 67mm tb... You can have my stock TB too (once I get it off the car.) I want the manifold too... :D

Check your PM. :tup:

[rpgt93]

okay here is the deal, first off jay I can't do that. The car is still staying in one piece, it is just losing the performance parts sorry so the turn signal is not for sale.
Cam all probe tail lights are the same (well they all mount the same and they use the same wiring harness) as a matter of fact my 96 tails are from an se, but they look and work the same, only difference is that there is no center piece on the se oh and just because they were from an se does not meant I paid any less for them.

So yeah just so everyone knows, all I'm doing at the moment is selling off performance parts and returning my probe to stock

[youngin]

are the tails in good cond?

[Splat]

why are you turning it to stock?? you gonna sell it?

[rpgt93]

Originally posted by Splat
why are you turning it to stock?? you gonna sell it?

yes, I'll be selling it. Not that I really need to but I don't need more than 1 car at a time and I have put in my time with the 2nd gen gt, my focus has now moved on to my mx6, 1st gen turbo is my new fun little project and I won't need a fully decked out probe if I'm not going to use it so I figure I'll help out a few of you guys that are looking for performance parts.

[Splat]

BOOOOST

[Purple_94GT]

Originally posted by rpgt93
Okay guys I've got a few things for sale off of my probe so check it out, heres what I've got


67mm throttle body new, bored by rob (cyborgzero) on probetalk $125

65mm throttle body used, $75

I need a stock throttle body so if anyone wants to sell me one I'll pay 25 bux or just take 25 off the price of a tb if you buy one

Also I have a ported stock intake manifold polished on the outside $50

Front and rear strut bars, $15 each



I'm interested in either one of the throttle bodies. I haven't had a chance to get into a shop to bore my spare. I'm thinking that the 65 mm would be safer for my application, because I will be clamping all of my intake piping joints with T-bolts (when I finally get the supercharger installed - senior design project is approved).

I might be interested in the strut tower bars. What brand are they? How much room is there between the intake manifold and the front strut tower bar? I need it to clear my intake manifold, as is or modified slightly, with the added height of pheno spacers.

BTW - nice job on the intake manifold. The porting looks good and I'm the sure the pictures don't do anything kind of justice for the external polishing.

Let me know by posting here or by private message.

Lucas

[jay]

Originally posted by Purple_94GT
How much room is there between the intake manifold and the front strut tower bar? I need it to clear my intake manifold, as is or modified slightly, with the added height of pheno spacers.

Lucas

i dont think you can have a strut tower brace with phenos added to your intake. i have my strut tower brace and i see its got at least 2mm gap between the intake and strut tower brace. so from what i see and hear.. it wont happen with the strut tower brace added with phenos spacers.

[rpgt93]

Okay about the strut bars, I've got phenos and the manifold would rub against it if phenos were installed. The front strut bar is r active I think I have a sticker on the bar, its been a little while since I've looked at it so I don't really remember (i'm in my basement right now) but the rear one is bomz or something. Personally I don't think it really matters what the brand name is a strut tower bar is a strut tower bar, basically I purchased both on ebay a while back for like 30ish each. My honest opinion on the intake manifold, I don't know whether or not it makes much of a performance difference but it looks very good, Imo its more of a dress up item but for 50 bux you can't go wrong. On the other hand though, this week I will be receiving my acid ported and polished intake manifold (finally) from rob aka cyborgzero. I may bolt it up as well as the 67mm tb to make sure it makes the difference he talks of. Supposedly Indymx6 on pt had a 93 mx6 ls and bolted up a 67mm tb with an acid ported intake manifold from rob and it dropped his 1/4 mile time from 15.8 to 15.0 on an otherwise bone stock car. If you don't believe me just search on probetalk it happened, he had almost the same launch and 60ft time but the quarter mile time dropped almost a full second all variables the same. They have dynoed and on a bone stock engine the tb with intake make a 8-10 wheel horse increase. So yeah I'll be getting that this week and I'd use it but I see more potential in my mx6 and I'll be selling my probe so I won't need this stuff. Its a sad day for me but I have to do it .

[rpgt93]

Oh and btw I really want/need a digital camera so if anyone has a pretty decent one and wants anything I've listed I would be willing to work something out or give a price you are looking for and I'll consider it

[Izacks1]

Do you still have the fuel pressure regulator.. If you do I want it. Im in the twin cities. It has the pressure gauge right. Need asap!!call me 6127479659

[probespeed]

He sold that on e-bay a couple days ago :shrug:

[rpgt93]

Originally posted by rpgt93
Okay guys I've got a few things for sale off of my probe so check it out, heres what I've got


67mm throttle body new, bored by rob (cyborgzero) on probetalk Sold

65mm throttle body used, Sold on ebay

Nitrous express wet kit Sold

Borla cat-back exhaust
Sold

4 stock camshafts a full set for the v6 2 intake and 2 exhaust, perfect for performance regrinds $40

2.5" Test pipe, Sold

96+ style taillights black trim, Sold

Front strut bar, $15

Red cosmo racing adjustable fuel pressure regulator Sold Ebay

My Subs and amp Sold

Full set of grey leather seats from a 93 gt fronts and rear, $25


MTD riding lawn tractor bagger, $50



Thanks ben, yeah I've sold a bunch of stuff but I updated this list, so yeah a bunch of this stuff I really just don't want anymore so make me an offer, as long as I can get rid of it I'll take most offers

What I have left is listed above but I'll put a few more things I have to pass on if anyone is interested.

I have 2 klo3 intake manifolds 20 bux each

2 air conditioning compressors 20 each

Front v-6 valve cover, Ford on it, I began sanding it down and making it look shiney but I gave up on the project cause I don't have the car anymore 10 dollars

A set of 4 205/45r16 tires, all with about 1/2 tread left. Real sporty tread, federal superstreet 595. Real nice tires, I can't use them I have 15" tires now. If anyone needs pics I can provide them 50 bux, they are yours.

stock v-6 starter, 10 bux

Finally the real performance part that I have left is
A kl03 intake manifold that has been acid ported and polished. All of the work was done and tested with a flowbench, when used with his 67mm tb the dyno tested results of the combo was an average of 10 wheel horse about the same as a klze intake manifold. Him and his partner jason tested multiple manifolds and tbs that they worked on and netted very similar results. I'm asking 100 for it, I can supply more pics if necessary but I believe what I have in my yahoo photos directory shows it pretty good already, I'll give the link again here
http://f1.pg.photos.yahoo.com/ph/rpgt93/my_photos the folder is new stuff

Any questions post, pm or e-mail me. I am excited to get some of this stuff out of my garage....well my dad is more excited about it moving out than me but you know

[Splat]

Do you still have the fstb?? I'm in need of one since Nick never got one on scooter...

[rpgt93]

its still listed as available so yes

[Splat]

ok.....

(wait for dramatic pause.........)



I'LL TAKE IT!!!