Clunking noise

[Benswen]

Ever since I lowered my Probe (w/ Sprint springs) I get this clunking noise from the opposite side of the car from the direction I'm turning (i.e., if I make a left, it clunks on the passenger side; if I make a right, it clunks on the driver side). It only happens when I accelerate and turn at the same time, and it doesn't happen every time. I replaced the inner and outer tie rod ends, and I'm thinking that it's the front swaybar endlinks, but how would those make a clunk? Anyone have this same problem, or have any input?

[eXtreMX-6]

Strut Bearing on the strut mount?

[MN Probe GT]

check cv boots.

[Aaron3969]

Possibly ball joints. Mine clunks and you could feel a knock on the floorboard when it happened.

[jay]

more of mounts since the car leans opposite side when turning causing alot of pressure therefore if shot they would make nasty irratating noises.

[Benswen]

Thanks to those who replied - I think I found the problem. I was driving yesterday and noticed that if I turn left and accelerate, I can feel the motor rock back before the clunk sound - definately mounts. Too bad I already replaced the tie rod ends - I coulda saved some money...