header help

[neptune45]

I have a few problems with my 90' probe (its a gt) for one there is a slight header problem, one of the bolts that hooks it up is busted off flush with the header itself, im not losing compression or anything but it makes a slight squealing sound when the turbo kicks in, so i was wondering what the best approach to fixxing this would be, any and all help would be appreciated


thanks
Dan

[Shrep]

I would look into removing the header and trying to turn it out by the part that sticks out past the block...though if it broke...that's not likely to work.

if it winds up snapping again...soak...i do mean SOAK it in PB Blaster and let stand for an hour or so...then, spray it down again and use an "Easy-out"

Even then you may wind up drilling it out, and re-tapping the threads. :(